The slotted design of this wiring duct allows for cable routing and management where breakouts are required. Available in white, gray and black flame-retardant PVC, slotted wiring duct comes in a variety of sizes, with or without an adhesive backing.
With twice the amount of slots as standard slotted duct, high density slotted duct is designed for routing and managing wire in applications where numerous breakouts are required. Available in white, gray and black flame-retardant PVC, high density slotted duct comes in a variety of sizes, with or without an adhesive backing.
Solid wall duct provides wire and cable routing and protection for straight runs where breakouts are not required. Available in white, gray and black flame-retardant PVC, solid wiring duct comes in a variety of sizes, with or without an adhesive backing.
Where public safety is a priority or regulated, such as in mass transit applications and confined or public spaces, halogen-free duct withstands extreme temperatures and meets low-fire/low-smoke requirements.
Flexible duct provides a bendable solution to route and protect wires. HelaDuct Flex serves applications where space is limited. Smooth, overlapping fingers eliminate the need for a separate cover, yet allow for easy access and inspection.
For use with all HellermannTyton solid and slotted wiring duct, duct dividers easily snap or slide inside duct to separate high and low voltage lines and reduce wire interference.
HellermannTyton offers a variety of accessories to complement our wiring duct lines including duct mounts, cover hinges, mounting rivets and duct cutting and notching tools.
HellermannTyton’s TSR surface raceway system organizes and protects low voltage cables and routes them along interior walls. Manufactured from a durable and lightweight PVC material, TSR raceway features an easy-to-use one piece design with an integrated security latch.
TSR low voltage raceway fittings and junction boxes provide all of the components necessary for clean and professional installations.
HellermannTyton’s TSRP power rated surface raceway system organizes and protects power and communication cables, and routes them along interior walls. Manufactured from a durable and lightweight PVC material, TSRP raceway features an easy-to-use one piece design with an integrated security latch. TSRP raceway components are UL5A listed and CSA 22.2 rated for up to 600 volts.
TSRP power rated raceway fittings and junction boxes provide all of the components necessary for clean and professional installations. Standard and round junction boxes create an outlet for communication jacks, power receptacles, hanging light fixtures, smoke detectors, carbon monoxide detectors and security cameras. TSRP raceway components are UL5A listed and CSA 22.2 rated for up to 600 volts.
General purpose braided sleeving products are designed to protect wire and cable bundles from abrasion and damage in standard applications and normal environmental conditions.
Flame retardant braided sleeving products are made of materials that will not melt, burn or disintegrate under flammable conditions. HellermannTyton offers specialty flame retardant materials that also provide electromagnetic protection as well as sleeving that is plenum rated.
High temperature braided sleeving products protect wires and cables in applications with temperatures in excess of 491° F (255° C). Materials include resin saturated fiberglass, highly flexible Nomex® and heat reflective aluminum laminated fiberglass.
These braided sleeving products are designed for easy application and removal. Wrap style sleeving products feature a lateral split and overlapping design, while expandable hook and loop sleeving is made with a hook and loop closure strip.
HellermannTyton specialty braided sleeving products are made of materials for specialized applications including those that require electromagnetic protection and electrostatic shielding. Nylon braided sleeving products perform extremely well in wet applications.
HellermannTyton offers a variety of installation tools and accessories to complement our braided sleeving products including hot knives for effortless cutting and a merchandising rack for retail counter sales.
Helawrap is quick and easy to install, and has a rigid-yet-flexible design which offers excellent protection from abrasion, pinching and crushing. The unique open construction allows for easy breakouts. General purpose Helawrap sleeving is made of polypropylene material that is suitable for use in normal operating environments.
Helawrap is quick and easy to install, and has a rigid-yet-flexible design which offers excellent protection from abrasion, pinching and crushing. The unique open construction allows for easy breakouts. Flame retardant Helawrap sleeving is made of polyamide 6V0 material for use in applications with extreme conditions and excessive heat.
The Helawrap cable management system includes clips and bases which route and secure the Helawrap sleeving. A specialized application tool makes installation and maintenance fast and easy.
The HelaGuard Non-Metallic series includes flexible corrugated conduits that offer high fatigue life properties and snap-on liquid tight fittings for high ingress protection.
HelaGuard Non-Metallic Snap-on Fittings provide superior tensile strength with a simple “push-on and twist” motion.
Specially designed clips hold the corrugated tubings in place, along with endcaps, locknuts and sealing washers.
General purpose Spiralwrap protective sheathing is made of polyethylene material that is suitable for use in normal operating conditions. Spiralwrap’s open wraparound design provides excellent routing and abrasion protection, while allowing for easy wire breakouts.
HellermannTyton Spiralwrap protective sheathing is available in specialty materials for use in applications with excessive heat. Spiralwrap’s open wraparound design provides excellent routing and abrasion protection, while allowing for easy wire breakouts.
Convoluted tubing protects wire and cable bundles from abrasion, chemicals, impact, crushing and vibration. A variety of materials are available for general purpose applications, flame-resistance and UV protection. Choose among slit and unslit styles.
Installation accessories to fasten, route, mount and protect convoluted tubing.
Flexiform general purpose grommet edging is made of a polyethylene material for use under normal operating conditions. Flexiform edging is available in a variety of sizes to fit different edge thicknesses, and is easily cut to size using standard scissors.
HellermannTyton offers Flexiform grommet edging in special materials for use in applications with excessive heat. Flexiform edging is available in a variety of sizes to fit different edge thicknesses, and is easily cut to size using standard scissors.
This general purpose flexible heat shrink tubing is suitable for protection, insulation, bundling and color identification of cables and light duty harnesses. The thin wall polyolefin material shrinks down to one-half of its supplied diameter when heat is applied. Sold in mini or bulk sized reels and 4-foot sticks.
This thin wall, flexible heat shrink tubing has excellent mechanical strength and insulation properties. A higher shrink ratio accommodates irregular shapes and a wide range of wire and bundle diameters. Available in bulk reels, retail bags, kits and 4-foot sticks.
This highly flexible 3 to 1 heat shrink tubing contains an inner layer of adhesive that activates when heated, to provide a tight seal and additional insulation along wire splices and harnesses. Considered highly flame retardant, this tubing is available in 4-foot sticks.
MA47 is a medium wall heat shrink tubing for low voltage applications. Available with shrink ratios up to 4 to 1. An adhesive lining activates when heated, to provide a tight seal and additional insulation. Available in 4-foot sticks.
HA47 is a thick walled heat shrink tubing for low and medium voltage applications. An adhesive lining provides excellent moisture sealing and weathering protection, making it suitable for above and below ground applications. This tubing is available with shrink ratios up to 3.5 to 1, and is sold in 4-foot sticks.
Bottle-style heat shrink shapes deliver in-line mechanical strength and environmental sealing when used in conjunction with circular grooved adaptors.
Angle-style heat shrink shapes provide strain relief and environmental sealing when used in conjunction with circular grooved adaptors.
Multi-outlet heat shrink shapes offer sealing strain relief and mechanical strength for multiple cable transitions or branch-outs.
Specialty heat shrink shapes bring sealing and strain relief to complex applications involving adapters and/or cables.
Low-profile heat shrink shapes contribute lightweight and compact strain relief in tight or confined spaces.
Route individual cable runs in virtually any solar module frame. This robust solution is angled to slip into existing module holes for easy, one-handed installation.
