Standard Cable Ties
These all-purpose cable ties are designed to bundle and secure wires, cables, hoses and more. Made of PA66 material, standard cable ties are available in 18 to 50 pound tensile strengths, in a variety of lengths and colors.
These all-purpose cable ties are designed to bundle and secure wires, cables, hoses and more. Made of PA66 material, standard cable ties are available in 18 to 50 pound tensile strengths, in a variety of lengths and colors.
These cable ties are made in specialty polymer materials for applications in extreme environments. Available materials include heat resistant, UV stable and chemical resistant polymers with varying levels of humidity tolerance.
Available in 120 to 250 pound tensile strengths, heavy duty cable ties are available in longer lengths, 8" - 52", for securing larger bundles.
These ties have a wide-yet-flexible strap that conforms to bundles to minimize pinching. Available in 120 pound tensile strength in a variety of lengths for securing different bundle sizes.
Outside serrated ties are designed to minimize abrasion on sensitive wires, cables and hoses. Available in 18 to 50 pound tensile strengths, in lengths 4" - 15", these ties also feature a lower profile head design.
Q Ties feature an open head and unique tail design to allow quick and easy application. Available in a range of sizes and materials, Q Ties can secure additional bundles by releasing the tail from the head. Use with Q Mounts and Q Tags for a complete cable management system.
Releasable cable ties are designed for easy removal and reuse. Available in standard and heavy duty tensile strengths, in lengths 5" - 40", for securing a variety of bundle sizes.
Clamp ties feature a unique head design that provides an even, consistent compression around soft rubber hoses including fuel, water and air vacuum lines. Available in 20 to 60 pound tensile strengths, in 4" and 8" lengths.
These ties create two loops to allow separation and harnessing of two wire, cable or hose bundles. The tie's second loop may be secured around a fixed object to secure the bundle without the need for additional fasteners. Available in 50 and 120 pound tensile strengths, in lengths 6" – 15.5", for securing a variety of bundle sizes.
Identification cable ties feature an integrated labeling area for pre-printed or manual write-on labeling. These ties are available in 18 to 50 pound tensile strengths, with single or multiple tie configurations and different label orientations.
Stainless steel cable ties provide maximum tensile strength and excellent heat, chemical and corrosion resistance for securing wire, cable and hose bundles in extreme environments. Available in 304 and 316 grade stainless steel, in tensile strengths of 200 to 922 pounds and lengths 5" - 49", for securing a variety of bundle sizes.
HellermannTyton offers a variety of cable ties with unique features for use in specialized applications.
Aerial Support Ties provide a dual-loop solution for suspending a bundle from an existing wire or similar lateral support. The one-piece design keeps the two runs separated and features a wide strap cable tie for enhanced performance.
Grip Ties are made with soft, flexible materials and a releasable hook and loop closure that is ideal for applications requiring repetitive access to cable and wire. Available in 6", 8", 11" and 15" sizes, in a variety of colors.
These ties feature an integrated arrowhead mount that inserts quickly into an existing hole with an audible "click" that lets the installer know it has been properly installed. Available in lengths 4.5" to 8.3", for a variety of hole diameters and panel thicknesses.
These ties attach and secure bundles to a weld stud bolt or machine screw stud. Stud mount cable ties are available with different mount orientations to accommodate a variety of applications.
These cable ties feature a versatile, highly engineered fir tree mount that inserts easily into existing holes to provide a secure fixing point for cable and wire bundles. Fir tree mounts work with a variety of panel thicknesses, and feature an integrated disk that provides protection from debris and liquids while offering extra stability in high vibration applications.
Screw mount cable ties have a built in mounting hole for quick and secure mounting with a screw or bolt. These ties are offered for a variety of mounting hole diameters to accommodate different screw and bolt sizes.
Edge clip cable ties secure wire and cable bundles to plastic or metal frame edges without the need for holes. These assemblies are available with edge clips that accommodate different panel thicknesses and cable routing orientations.
Button head cable ties provide a one piece mounting solution that eliminates the need for additional mechanical fasteners by allowing the cable to enter and exit through the tie head. The low profile head design works with existing holes. These ties feature serrations on both sides for easier installation.
Blind hole mount cable ties for threaded and non-threaded holes are designed to accelerate the bundling and affixing of wire bundles and cables. The new mounting system eliminates extra hardware versus traditional screw mounts when mounting to deep, quarter-inch diameter holes, especially in spaces difficult to access.
Dual clamp ties feature a unique head design that separates two parallel bundles. These heavy duty ties are made with wide straps that conform to bundles to minimize pinching and include a hole for optional mounting on frame panels.
Designed for use with cable ties, these spacers are installed between two intersecting bundles to separate bundles and minimize abrasion. The spacers are easily rotated by hand allowing bundles to cross at any angle.
These heavy duty clamps separate and secure multiple bundles to minimize abrasion.
For use with cable ties, adhesive mounting bases attach to surfaces to provide a fixing point for routing wire and cable bundles. HellermannTyton offers bases with a variety of adhesive backings, from rubber adhesive for general purpose use to (very high bond) VHB adhesive backings for outdoor or extreme temperature applications.
These bases screw into surfaces to provide a fixing point for routing bundles. Available for use with a variety of cable tie widths, these bases are offered in standard, low profile and standoff models.
Mounting plates are fastened with a screw to provide a fixing point for securing and routing one or more wire or cable bundles.
For use with cable ties, push mounts insert into existing holes to provide a fixing point for securing and routing cable and wire bundles.
Masonry mounts easily insert into predrilled holes in surfaces such as concrete, cinder block and brick, eliminating the need for costly masonry screws. For use with cable ties, these mounts provide a fixing point for securing and routing wire and cable bundles.
For use with hook and loop Grip Ties, these mounts have an adhesive backing that installs on flat surfaces to provide a fixing point for routing cable and wire bundles.
These heavy duty cable tie mounts attach with a screw or bolt to an existing hole, providing a fixing point for securing and routing a single bundle. Offered in different torque capacities, products in this category include mounts that provide standoff bundle positioning.
These heavy duty cable tie mounts attach with a screw or bolt to existing holes to provide a fixing point for securing and separating multiple wire or cable bundles.
For use with heavy duty cable ties, stud bolt mounts attach to existing heavy duty bolts, including “huck” bolts, eliminating the need for additional fasteners.
Fir tree mounts insert into existing holes to provide a fixing point to secure, route and/or separate wire and cable bundles. Designed for use with cable ties, HellermannTyton offers fir tree mounts that raise bundles off of frame surfaces, as well as models that can separate up to four bundles.
Designed for use with cable ties, fir tree mounts insert into existing holes to provide a fixing point to secure, route and/or separate wire and cable bundles.
Available for different bundle diameters, these clips screw into surfaces to provide a secure fixing point for routing wire and cable bundles. The open clip design allows easy placement and release of bundles, for quick installation and maintenance.
Designed for routing wire and cable on wood, drywall, masonry joints, cinder block and mortar, nail clips include a hardened steel nail that won’t bend during installation
These clips feature a modular design that allows them to be used individually or linked together to secure multiple pipes or hoses. Choose from models with or without an integrated push mount that snaps into panel holes.
Designed for use with cable ties or electrical tape, bundling clips provide a simple method of securing wire and cable bundles. HellermannTyton offers these clips in standard and standoff orientations, with a variety of mounting options.
Connector clips offer an easy way to secure and mount wire harnesses. Choose from a wide range of clip styles with a variety of mount options including edge clip, fir tree and push mount styles
HellermannTyton edge clips mount and route wire and cable bundles without the need for mounting holes or additional fasteners. Edge clips feature a metal clip that firmly attaches to a plastic or metal edge and an additional clip area that holds a wire or cable bundle. HellermannTyton offers edge clips in a variety of high performance materials, including stainless steel.
These clips provide a quick and easy method for securing and routing convoluted tubing. The clip includes an internal rib that prevents lateral movement of tubing. Convoluted tubing clips are available in stud mount or fir tree mount models for different bundle diameters.
Available in sizes ranging from .25” to 4.5” in diameter, HellermannTyton “Snapper” hose clamps easily ratchet closed for quick and easy installation. Made of high performance, durable plastic materials, these lightweight clamps apply firm, even pressure that will not distort or crush hoses.
These P-shaped clamps are designed to secure cable, hose and wire bundles by attaching to them to existing holes. Made of a durable but lightweight plastic material, they are ideal for use in applications where weight minimization is important.
Designed to route and protect flat ribbon cables in computers, electronics, panels and components, these clamps adjust to accommodate the exact height of the cable, for a secure hold that will not damage sensitive wires or cables. Choose from adhesive backed and screw mount models.
Offered in four sizes and in several mounting configurations, the Ratchet Clamp's reusable design minimizes part inventory, speeds fastening, and simplifies maintenance. Engineered for heavy equipment manufacturing, it also solves wire bundling challenges in OEM, automotive and solar installations.
These clamps have an adhesive backing to provide a fast and convenient method of routing wire and cable bundles along flat surfaces.
Locking Clamps are designed with a pressure sensitive clip that automatically closes around cable and hose bundles as the bundle is inserted. These clips feature a modular design that allows them to be linked together to secure multiple bundles. Available with or without an integrated push mount that snaps into existing holes.