Bundling & Securing

These all-purpose cable ties are designed to bundle and secure wires, cables, hoses and more. Made of PA66 material, standard cable ties are available in 18 to 50 pound tensile strengths, in a variety of lengths and colors.

These cable ties are made in specialty polymer materials for applications in extreme environments. Available materials include heat resistant, UV stable and chemical resistant polymers with varying levels of humidity tolerance.

Available in 120 to 250 pound tensile strengths, heavy duty cable ties are available in longer lengths, 8" - 52", for securing larger bundles.

These ties have a wide-yet-flexible strap that conforms to bundles to minimize pinching. Available in 120 pound tensile strength in a variety of lengths for securing different bundle sizes.

Low profile cable ties feature a compact, contoured head designed to use less space in confined areas and reduce protrusions that might otherwise interfere with or damage adjacent wire insulation and hoses.

Outside serrated ties are designed to minimize abrasion on sensitive wires, cables and hoses. Available in 18 to 50 pound tensile strengths, in lengths 4" - 15", these ties also feature a lower profile head design.

Q Ties feature an open head and unique tail design to allow quick and easy application. Available in a range of sizes and materials, Q Ties can secure additional bundles by releasing the tail from the head. Use with Q Mounts and Q Tags for a complete cable management system.

Releasable cable ties are designed for easy removal and reuse. Available in standard and heavy duty tensile strengths, in lengths 5" - 40", for securing a variety of bundle sizes.

Clamp ties feature a unique head design that provides an even, consistent compression around soft rubber hoses including fuel, water and air vacuum lines. Available in 20 to 60 pound tensile strengths, in 4" and 8" lengths.

These ties create two loops to allow separation and harnessing of two wire, cable or hose bundles. The tie's second loop may be secured around a fixed object to secure the bundle without the need for additional fasteners. Available in 50 and 120 pound tensile strengths, in lengths 6" – 15.5", for securing a variety of bundle sizes.

Identification cable ties feature an integrated labeling area for pre-printed or manual write-on labeling. These ties are available in 18 to 50 pound tensile strengths, with single or multiple tie configurations and different label orientations.

Stainless steel cable ties provide maximum tensile strength and excellent heat, chemical and corrosion resistance for securing wire, cable and hose bundles in extreme environments. Available in 304 and 316 grade stainless steel, in tensile strengths of 200 to 922 pounds and lengths 5" - 49", for securing a variety of bundle sizes.

HellermannTyton offers a variety of cable ties with unique features for use in specialized applications.

Aerial Support Ties provide a dual-loop solution for suspending a bundle from an existing wire or similar lateral support. The one-piece design keeps the two runs separated and features a wide strap cable tie for enhanced performance.

Grip Ties are made with soft, flexible materials and a releasable hook and loop closure that is ideal for applications requiring repetitive access to cable and wire. Available in 6", 8", 11" and 15" sizes, in a variety of colors.

Dual-material cable tie features a pliable TPE layer that protects sensitive wire bundles and tubes while inhibiting lateral slip-through.

This routing clip with cable tie keeps two routings secured and separated while allowing them to rotate independently of each other. The tie also prevents axial slip.

This routing clamp with cable tie keeps two routings secured and separated while allowing them to rotate independently of each other. The tie also prevents axial slip.

These ties feature an integrated arrowhead mount that inserts quickly into an existing hole with an audible "click" that lets the installer know it has been properly installed. Available in lengths 4.5" to 8.3", for a variety of hole diameters and panel thicknesses.

These ties attach and secure bundles to a weld stud bolt or machine screw stud. Stud mount cable ties are available with different mount orientations to accommodate a variety of applications.

These cable ties feature a versatile, highly engineered fir tree mount that inserts easily into existing holes to provide a secure fixing point for cable and wire bundles. Fir tree mounts work with a variety of panel thicknesses, and feature an integrated disk that provides protection from debris and liquids while offering extra stability in high vibration applications.

Screw mount cable ties have a built in mounting hole for quick and secure mounting with a screw or bolt. These ties are offered for a variety of mounting hole diameters to accommodate different screw and bolt sizes.

Edge clip cable ties secure wire and cable bundles to plastic or metal frame edges without the need for holes. These assemblies are available with edge clips that accommodate different panel thicknesses and cable routing orientations.

Button head cable ties provide a one piece mounting solution that eliminates the need for additional mechanical fasteners by allowing the cable to enter and exit through the tie head. The low profile head design works with existing holes. These ties feature serrations on both sides for easier installation.

Blind hole mount cable ties for threaded and non-threaded holes are designed to accelerate the bundling and affixing of wire bundles and cables. The new mounting system eliminates extra hardware versus traditional screw mounts when mounting to deep, quarter-inch diameter holes, especially in spaces difficult to access.

These routing clips keep two routings secured and separated while allowing them to rotate independently of each other..

A routing clip and clamp combination that keeps two routings secured and separated while allowing them to rotate independently of each other.

Dual clamp ties feature a unique head design that separates two parallel bundles. These heavy duty ties are made with wide straps that conform to bundles to minimize pinching and include a hole for optional mounting on frame panels.

Designed for use with cable ties, these spacers are installed between two intersecting bundles to separate bundles and minimize abrasion. The spacers are easily rotated by hand allowing bundles to cross at any angle.

These heavy duty clamps separate and secure multiple bundles to minimize abrasion.

Use these clamps to keep bundles separated with the added ability to mount the configuration to minimize abrasion and control routing.

For use with cable ties, adhesive mounting bases attach to surfaces to provide a fixing point for routing wire and cable bundles. HellermannTyton offers bases with a variety of adhesive backings, from rubber adhesive for general purpose use to (very high bond) VHB adhesive backings for outdoor or extreme temperature applications.

These mounts attach with a twist to extruded aluminum frames found on processing machines, conveyors and other manufacturing equipment. Paired with a cable tie, they route wires parallel or perpendicular to frame rails.

These bases screw into surfaces to provide a fixing point for routing bundles. Available for use with a variety of cable tie widths, these bases are offered in standard, low profile and standoff models.

Mounting plates are fastened with a screw to provide a fixing point for securing and routing one or more wire or cable bundles.

For use with cable ties, push mounts insert into existing holes to provide a fixing point for securing and routing cable and wire bundles.

Masonry mounts easily insert into predrilled holes in surfaces such as concrete, cinder block and brick, eliminating the need for costly masonry screws. For use with cable ties, these mounts provide a fixing point for securing and routing wire and cable bundles.

For use with hook and loop Grip Ties, these mounts have an adhesive backing that installs on flat surfaces to provide a fixing point for routing cable and wire bundles.

These heavy duty cable tie mounts attach with a screw or bolt to an existing hole, providing a fixing point for securing and routing a single bundle. Offered in different torque capacities, products in this category include mounts that provide standoff bundle positioning.

These heavy duty cable tie mounts attach with a screw or bolt to existing holes to provide a fixing point for securing and separating multiple wire or cable bundles.

For use with heavy duty cable ties, stud bolt mounts attach to existing heavy duty bolts, including “huck” bolts, eliminating the need for additional fasteners.

Fir tree mounts insert into existing holes to provide a fixing point to secure, route and/or separate wire and cable bundles. Designed for use with cable ties, HellermannTyton offers fir tree mounts that raise bundles off of frame surfaces, as well as models that can separate up to four bundles.

Designed for use with cable ties, fir tree mounts insert into existing holes to provide a fixing point to secure, route and/or separate wire and cable bundles.

Offered in four sizes and in several mounting configurations, the Ratchet Clamp's reusable design minimizes part inventory, speeds fastening, and simplifies maintenance. Engineered for heavy equipment manufacturing, it also solves wire bundling challenges in OEM, automotive and solar installations.

These clamps conveniently adjust to the bundle size, reducing part inventory, and feature various integrated mounts to suit multiple applications without additional hardware.

With its compact footprint, the Ratchet O-Clamp is made for tight spaces. It combines variable bundle sizing with multiple mount options and an optional soft-grip internal layer – an ideal solution for fluid routing and electrical cable management.

These clips feature a modular design that allows them to be used individually or linked together to secure multiple pipes or hoses. Choose from models with or without an integrated push mount that snaps into panel holes.

Available for different bundle diameters, these clips screw into surfaces to provide a secure fixing point for routing wire and cable bundles. The open clip design allows easy placement and release of bundles, for quick installation and maintenance.

Designed for use with cable ties or electrical tape, bundling clips provide a simple method of securing wire and cable bundles. HellermannTyton offers these clips in standard and standoff orientations, with a variety of mounting options.

Connector clips offer an easy way to secure and mount wire harnesses. Choose from a wide range of clip styles with a variety of mount options including edge clip, fir tree and push mount styles

HellermannTyton edge clips mount and route wire and cable bundles without the need for mounting holes or additional fasteners. Edge clips feature a metal clip that firmly attaches to a plastic or metal edge and an additional clip area that holds a wire or cable bundle. HellermannTyton offers edge clips in a variety of high performance materials, including stainless steel.

Fir tree clips insert easily into mounting holes to provide a secure fixing point to route wires and cables. Bundles easily snap in and out of clips, while the fir tree mount holds the clip securely in place and provides a high extraction force.

An ultra-secure routing clip connected to a round or oval fir tree for easy insertion into an existing panel hole.

HellermannTyton Push Pins are used to secure channels, Ratchet P-Clamps and other components to surfaces with holes such as machine frames and rails, chassis and panels in trunks, doors, wheel housings and dash panels. They are designed for easy installation without a tool.

HellermannTyton's unique retention clip is paired with a best-in-class stud mount to secure to an existing stud or bolt.

A dual locking clamp-to-clamp combination that keeps two routings secured and separated.

A routing clip and clamp combination that keeps two routings secured and separated while allowing them to rotate independently of each other.

Available in sizes ranging from .25” to 4.5” in diameter, HellermannTyton “Snapper” hose clamps easily ratchet closed for quick and easy installation. Made of high performance, durable plastic materials, these lightweight clamps apply firm, even pressure that will not distort or crush hoses.

These P-shaped clamps are designed to secure cable, hose and wire bundles by attaching to them to existing holes. Made of a durable but lightweight plastic material, they are ideal for use in applications where weight minimization is important.

Designed to route and protect flat ribbon cables in computers, electronics, panels and components, these clamps adjust to accommodate the exact height of the cable, for a secure hold that will not damage sensitive wires or cables. Choose from adhesive backed and screw mount models.

An ultra-secure routing clamp connected to a round or oval fir tree for easy insertion into an existing panel hole.

These clamps have an adhesive backing to provide a fast and convenient method of routing wire and cable bundles along flat surfaces.

HellermannTyton's unique locking option clamp is paired with a best-in-class stud mount to secure to an existing stud or bolt.

An ultra-secure routing clamp connected to an edge clip for easy attachment to a panel edge.

This high-strength magnetic mount combines with a cable tie to provide a unique routing solution that needs only a steel surface – no holes, hardware or adhesive.

The clip attached to this high-strength magnetic mount provides an easy push-in routing solution that needs only a steel surface – no holes, hardware or adhesive.

Bridle rings provide a quick slip-in method to manage wires and cables, while the high-strength magnetic mount provides a unique routing solution that needs only a steel surface – no holes, hardware or adhesive.

These open J-Hooks can support large cables and hoses, while the attached high-strength magnetic mount provides a reliable routing solution that needs only a steel surface – no holes, hardware or adhesive.

This device mounts and positions proximity sensors, incorporating special features to make installation fast and easy.